Push back racking (also referred to as pushback racking) is a pallet storage method that allows pallets to be stored from 2 to 6 deep on either side of an aisle, giving you higher storage density than other forms of racking. Viet Pos Rack is a unit specializing in the production and installation of pushback racking system in Vietnam and many other neighboring countries. Contact Viet Pos Rack immediately for advice.

Mr Dung: (+84) 796 700 777

Specs push back racking

– Load capacity: 500kg – 1500kg/ Pallet
– Frame: 100×75 Omega, 2.0 – 3.0mm thick
– Maximum height: 11m
– The beam 120×50 arm is 2.0 – 3.0mm thick
– Iron rims 1.2 – 1.4mm thick
– Steel beam bracing bar box 25x50x1.2mm
– Iron tie bar box 20x40x1.2mm
– Base base, 2.5mm protection box
– Powder coating in orange and blue
– Safe deflection: 0.5%
– Material tolerance: ± 5%
– Powder coating: Oxyplast powder coating material.

Photo realistic

Two types of Push-Back Racking

– Depending on the movement system used to move the pallets, there are two types of Push-Back Racking:
+ Push-back with shuttles: In the system with shuttles, each pallet, except the last one, is deposited on a shuttle, which moves on rails with a slight incline.
+ Push-back with rollers: The pallets are moved by means of roller beds fixed to the structure with a slight incline.
– Like other live storage solutions, it is a high-density storage system, which optimises the available storage space.
– It can also be combined with other storage systems which makes it a versatile solution.

Push-Back Racking (LIFO)

– The push-back racking system is a live storage solution for pallets formed by a compact structure, where unit loads are moved by means of rollers or shuttles with the aid of a slight incline.
– It is a system especially designed for LIFO stock management (Last in, First out), where the last pallet placed on the rack is the first to be unloaded.
– Unlike FIFO live storage, which needs one aisle for loading and another for unloading, in push-back racking, the forklift accesses the stored unit loads along a single work aisle.
– Exerting a pushing force is used to place a new pallet, where the forklift pushes the unit loads already stored towards the back, making space for the new pallet to be deposited, hence the term “push-back”.
– The unloading process uses the force of gravity, is performed in the same location as the loading and is similar to the FIFO type live storage. When the first unit load is unloaded, the following positions slide in a controlled way towards the unloading position.

Applicable model

– Narrow warehouse area requires large amount of storage
– Industrial production
– Production storage materials
– Chemical, garment, electronics, materials factories,…
– E-commerce warehouse
– Warehouse of finished products

Reference solutions at Viet Pos Rack

0796 700 777